← All products
HARDWARE / zSDR

zSDR.
Swiss-developed hardware.

Our Swiss-developed software-defined radio platform can be tailored to different applications. Depending on the zSDR variant, different RX/TX configurations are available, including 2 RX / 2 TX, 4 RX / 4 TX and 6 RX / 0 TX.

Up to 6 RXCoherent RX channels
Up to 4 TXRF transmit channels
5 MHz – 12 GHzRF frequency range*
Up to 1.2 GHzInstantaneous bandwidth*
Up to 3 / 12 GSPSADC / DAC – max. sample rates
Zynq UltraScale+FPGA + embedded processing

* Depending on the zSDR variant, the RF frequency range extends from 5 MHz up to 12 GHz. RX bandwidth: up to 1.2 GHz with four RX or up to 600 MHz with six RX. TX bandwidth: up to 1.2 GHz with four TX. Usable system bandwidth depends on the variant and signal processing.

zSDR Specifications

Channel count, RF frequency range, bandwidth and interfaces depend on the zSDR variant and selected options. Maximum values are not available simultaneously in every variant. TX specifications apply to variants with transmit channels.

zSDR Specifications
ParameterSpecification
RF architectureDirect RF sampling
Coherent receive channelsUp to 6
Transmit channelsUp to 4
RF frequency rangeFrom 5 MHz up to 12 GHz — zSDR-variant-dependent*
Max. instantaneous RX bandwidth≤ 1.2 GHz*
Max. instantaneous TX bandwidth≤ 1.2 GHz*
ADC sample rate3 GSPS (max.)
DAC sample rate12 GSPS (max.)
RX ADC resolution14 bit
Digital downconversionDDC / NCO
Digital upconversionDUC / NCO
Converter interfaceJESD204C
FPGA / SoCAMD Zynq UltraScale+ MPSoC — variant-dependent
System memory4 GB DDR4
Host interfaceEthernet 10/100/1000 Mbit/s or Wi-Fi — configuration-dependent
Operating systemEmbedded Linux / Bare-metal / FreeRTOS
FPGA developmentAMD Vivado / Vitis

Clocking & Synchronization

Clocking and the digital I/Q output sample rate are tailored to the application. The ADC sample rate describes sampling in the converter and is distinct from the I/Q output sample rate after digital processing. SYSREF enables channel synchronization and deterministic latency.

Clocking & Synchronization
ParameterSpecification
Reference clockConfiguration-dependent
Digital I/Q output sample rateConfiguration-dependent
Channel synchronizationSYSREF synchronized
Deterministic latencySupported
Coherent samplingSupported

One platform for different applications.

Firmware determines how signals are acquired and processed. This allows zSDR to be adapted to different tasks, such as mobile phone localisation with InPercept.